CompuLab IPC2 Especificações descarregar pdf (Página 58)

CompuLab Ltd. IPC2 – Hardware Specification Page 58 of 83

Table 32 – Upstream Port DP Connector Pinout

Notes:

1. Pins 13 and 14 must be connected to ground through a pull-down device. External devices

and cable assemblies must be designed to not rely on a low impedance ground path from

these pins.

2. Pin 20, PWR Out, must provide +3.3 volts ±10% with a maximum current of 500mA and a

minimum power capability of 1.5 watts.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 82 83

Sem comentários

CompuLab IPC2 Especificações Página 58